Cycle the ignition when the vehicle is safely and completely stopped and the transmission is placed in the PARK position. If a problem is detected while the vehicle is running, the light will either stay on or flash depending on the nature of the problem. This warning light will illuminate to indicate a problem with the ETC system.The light will remain on until the cause is corrected.Įlectronic Throttle Control (ETC) Warning Light.A leak in either half of the dual brake system is indicated by the Brake Warning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system.If the problem is related to the brake booster, the ABS pump will run when applying the brake, and a brake pedal pulsation may be felt during each stop. To Pair Your BluetoothTM Hands-Free Profile Wireless Phone with UConnect: First, print out these instructions, then print out the pairing instructions for. In this case, the light will remain on until the condition has been corrected. Booster has been detected by the Anti-Lock Brake System (ABS) / Electronic Stability Control (ESC) system.If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake.If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the Anti-Lock Brake System reservoir. If you have trouble with the software update, please contact Uconnect Care at.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |